Manufacturer:
Fischer
Availability:
Available up to 48 hours
Product description
Main features
- It is possible to use traditional metric screws and threaded rods. This reduces the costs and complexity of the system.
- Possibility of multiple assembly and disassembly. The attachment points can be reused.
- ETA approval for maximum safety.
The fischer FIS E injection thread anchor is made of galvanized steel and is used with fischer masonry mortars. The internal threaded anchor is placed by hand by gently rotating. The mortar joins the entire surface of the internally threaded rod and the wall of the hole in the wall of solid brick. In honeycomb materials, the mortar is pressed through the mesh of the anchor sleeve and locks in conjunction with the honeycomb brick. The loads are thus transferred to the ground. The use of an injection anchor with an internal thread FIS E allows disassembly and reassembly of fittings flush with the surface.
Benefits
- The FIS E internal thread anchor is suitable for use with injection mortar in masonry or aerated concrete.
- The use of an FIS E internal thread anchor allows dismantling and reassembly of the mounting, thus offering the best possible flexibility.
- The metric internal thread allows the use of standard metric screws and threaded rods, which allows it to be perfectly adapted to the intended application.
- Read the approvals for the mortar.
Usage
- Removable and temporary fixings
- Anchoring in masonry and aerated concrete with FIS V, FIS VL, FIS P Plus, FIS P and FIS GREEN injection mortars
Building Materials
Approval for:
- full silicate blocks
- silicate blocks
- Full brick
- Lightweight concrete blocks
- ceramic blocks
- Lightweight hollow concrete blocks
- Full bricks
- Aerated concrete blocks
Also suitable for:
- Lightweight concrete blocks
- Full aerated concrete and other building materials
* Detailed information on the subject can be found in the registration document.
Permit
- ETA-15/0263
Functioning
- The system can be used with injection mortars: FIS V, FIS VS Low Speed and FIS VW High Speed. FIS VT and FIS P mortars can also be used.
- The FIS E internal thread anchor is suitable for pre-assembly and the FIS A rod is suitable for both pre-assembly and through-fitting.
- The mortar binds the fastener over the entire contact surface with the hole wall and seals the hole.
- The anchor is manually inserted with a slight screwing in, up to the bottom of the drilled hole.
Technical data
| Hole diameter | d 0 | 14 | [Mm] |
| min. anchorage depth | h ef | 85 | [Mm] |
| min. screw-in depth | l E, min | 8 | [Mm] |
| max. screwing depth | l E, max | 60 | [Mm] |
| The amount of mortar for the minimum depth of anchorage in full brick | 4 | [scale units] | |
| 10 | |||
| GTIN (EAN-Code) | 4006209436325 |
€172.84
/ pcs
€212.59
/ pcs
Świetna opinia
30 dni na zwrot!
Od 40 lat na rynku
Zakupy na termin!
Have you purchased this product?