Angle grinder 125 mm, 1500 W with variable speed DWE4257 DeWal
Manufacturer:
DeWalt
Availability:
Available up to 48 hours
Product description
Angle grinder 125 mm, 1500 W with variable speed
DWE4257
- Electronic speed control enables precise control and means that the tool can be used optimally depending on equipment and material
- The safety clutch reduces the reflection transmitted to the operator in the event of grinding wheel jamming
- The cut-off switch in the event of a power failure prevents the grinder from starting automatically when it reappears in the network. Even if the switch is in the working position; for the machine to operate, the switch must be switched on again
Features
- Electronic speed control enables precise control and means that the tool can be used optimally depending on equipment and material
- The safety clutch reduces the reflection transmitted to the operator in the event of grinding wheel jamming
- The cut-off switch in the event of a power failure prevents the grinder from starting automatically when it reappears in the network. Even if the switch is in the working position; for the machine to operate, the switch must be switched on again
- Overload protection protects the tool from overheating by switching off the grinder until it cools down
- The dust ejection system with an additional fan removes most of the impurities from the engine cooling air, preventing its seizing and damaging the winding insulation
- The side anti-vibration handle increases comfort
- The new design of the cover allows its attachment, positioning and disassembly without the use of tools, which increases operational flexibility
- Very carefully insulated stator windings increase motor life
- Self-detaching brushes protect the stator windings from damage at the end of brush life, which increases motor life
- The compact transmission allows good access in harsh conditions
- Motor protected against dust and seizure
- The anti-lock collar prevents the wheels from getting stuck permanently
STANDARD EQUIPMENT
- tool-free cover
- multi-position side anti-vibration handle
- internal and external flanges of grinding wheels
- key
Technical data
Power consumed | 1500 watts |
No load speed | 2,800 - 10,000 rpm |
Disc diameter | 125 mm |
Spindle thread | M14 |
Mass | 2.6 kg |
Length | 315 mm |
Height | 95 mm |
Shoulder vibration - fine sanding | 8.3 m / s2 |
Measurement uncertainty K 1 (vibration) | 1.5 m / s2 |
Shoulder vibration - grinding | 3.0 m / s2 |
Measurement uncertainty K 2 (vibration) | 1.5 m / s2 |
Sound pressure | 92 dB (A) |
Measurement uncertainty K 1 (noise) | 3 dB (A) |
Sound pressure | 103 dB (A) |
Measurement uncertainty K 2 (noise) | 3 dB (A) |
€128.41
/ pcs
€157.95
/ pcs
Have you purchased this product?