Manual squeezer for foil loads of the CFS + 300ml system..

Product description

Manual squeezer for foil loads of the CFS + 300ml system.

Features and Benefits:

• Manual operation - no power supply required
• The type of dispenser used for anchoring strictly depends on the type of anchoring system (cartridge capacity, CFS + system)
• Quick and easy dosing of resin
• Easy to use
• Solid construction in all work conditions

Apps:

• Dosage dedicated to the CFS + 300 ml system
• For various types of fixings in a glued system in concrete and solid and hollow masonry substrates

Installation instructions:

1. Drill a hole of suitable diameter and depth.
2. Remove the cuttings from the hole using a hand pump and a wiper four times. These are necessary steps before installation.
3. Place the foil load in the squeezer and attach the mixing nozzle
4. When starting dispensing from a new package, discard part of the resin until the mix has the same color
5. Fill 70% of the hole depth with resin, starting from the bottom of the hole
6. Immediately after the resin is dosed, place the rod in the hole. Remove unnecessary resin that has flowed out of the hole and wait for a suitable resin setting time
7. Attach the fixture and tighten the nut to the required tightening torque.