Podaj nazwę sekcji
Recommended products
Product description
The product is ideal for manual and machine application should be used in layers up to 3mm thick.
The finished SHEETROCK SuperFinish leveling compound is the content of dolomite flour with vinyl binder as an addition contains ingredients that improve the usable properties of these masses
Super Finish meets the requirements of EN 13963 and has a Hygienic Certificate allowing use in housing, health care facilities, nurseries, kindergartens and schools, in the food industry and similar.
Field of application:
Designed to create perfectly smooth and even surfaces in interiors. Can be applied by hand and machine in layers up to 3 mm thick. The finished Knauf Super Finish leveling compound can be used for full-area thin-layer leveling:
■ mineral building substrates such as: stable plasters (gypsum, lime, cement-lime), concrete surfaces, gypsum blocks, aerated concrete blocks
■ clean and stable resin plasters, varnished surfaces (paneling), painted with paints, finished with fiberglass wallpapers, etc.
■ plasterboard
Features:
■ ready-to-use, factory-prepared mixture
■ convenient to apply and spread
■ Easy to sand and process after application
■ the resulting surfaces are durable during use
■ allows you to get an ideal substrate for further finishing work
Method of implementation
Substrate preparation:
The substrate must be dry, stable, clean and free of dust.
Large unevenness or damage must be filled with Knauf Fugenfuller or Knauf Uniflott.
Priming:
Plasterboards with joints jointed with Knauf Uniflott do not require priming.
Absorbent or unstable substrates should be primed or reinforced with Knauf Tiefengrunt.
Earning:
After mixing, the Knauf Super Finish leveling compound can be used directly from the bucket. The mass can be diluted as needed by adding water in 250 ml portions.
After each addition of water, the mass should be slightly mixed and checked for use. Use only clean tools and containers.
Treatment
■ Apply in layers up to 3 mm thick
■ Apply the next coat after the previous one dries
■ Sand the dry surface with # 180 - # 240 paper, at least 3-4 days after application
■ After a long time, the surface becomes hard and durable
■ After drying, prime the surface with a primer
■ A surface finished this way can be painted with all types of paints
■ The finished Knauf Super Finish putty hardens by drying, so the processing time depends on the temperature and humidity
Additional information Additional information
■ Application temperature: above + 13 ° C and below 25 ° C.
■ Filling may only occur if there are no major relative elongations of Knauf boards, eg due to changes in humidity or temperature.
■ For mastic asphalt, cement and liquid screed floor screeds, the Knauf boards should only be leveled after floor screeds have been made.
■ Observe the instructions in the "Technical Conditions for Making and Accepting Sy
Have you purchased this product?